Thermo Fisher Scientific CyberScan pH 5000 - Manual (Page 65)

Instruction Manual CyberScan pH5500/ 5000
This screen allows you to select which criteria are printed with the
measurement when you print the data or send it to the computer. The
status of the current print criteria is displayed on the screen. The
criteria option is active if “ON” appears to the right of the option. It is
inactive if “OFF” appears to the right of the option. Any active criteria
will be printed on demand.
To Set Print Criteria
1. Access the Set Print Criteria screen from the pH (mV, Ion) Setup
screen. The current print criteria are displayed on the screen.
2. Use the arrow keys to highlight the print criteria option you want
to modify.
3. Touch ON or OFF change the status of the criteria.
4. Repeat steps 2 and 3 with the remaining criteria.
5. Touch save to save the entire group of print criteria and return to
the pH (mV, Ion) Setup screen.
OR
Touch exit to return to the pH (mV, Ion) Setup screen, without
making any changes.
The Date/ Time/ Channel option and the measurement option are
always active and cannot be deactivated. These criteria will always
be printed. Because they can not be changed, they will not be
highlighted when using the arrow keys.
60