NORD Drivesystems BU0280 - Manual (Page 5)

Supplementary Manual DeviceNet for NORDAC SK 200E About this document
BU 0280 GB 5
Intended use of the frequency inverter
Compliance with the operating instructions is the requirement for error-free operation and
the fulfilment of any warranty claims. You must first read these operating instructions
before working with the device!
These operating instructions contain important information about service. They must
therefore be kept close to the device.
The field bus technology options described here are intended for use in combination with SK
200 E series frequency inverters. Use with other series is only possible with the SK TU4-
DEV(-C)) and SK TU4-DEV-M12(-C) technology modules for the SK 500E. The use of these
technology options with other devices is not permitted and can lead to their destruction.
The field bus technology options and the associated frequency inverters are devices for fixed
installation on motors or in equipment close to the motor to be operated. All data regarding
technical data and permissible conditions at the installation site must be complied with.
Commissioning (implementation of the intended use) is not permitted until it has been
ensured that the machine complies with the EMC directive 89/336/EEC and that the
conformity of the end product meets the machine directive 89/392/EEC (note EN 60204).
 Getriebebau NORD GmbH & Co. KG, 2009