HP ProLiant BL10e G2 Server Blade - Manual (Page 103)

Command Line Interface
Table 4-6: Server Bay Management Commands continued
Command Description Restrictions
SHOW BAY STATUS [ALL
| <bay number> {[ ,
| - ] <bay number>}] Displays the power (On or Off),
assigned to group, remote
console user, health (OK, CPU
failure, or power module
failure), thermal (OK, warm,
degraded, or failed), and Unit
Identification LED (On or Off)
for the server blade. Group members and group
administrators only see
information for the bays in their
groups.
SHOW SYSLOG BAY <bay
number> Displays the syslog of the
specified blade with 22 lines
per screen.
Typing “q” q uits the command;
any other key shows the next
screen if more information is
available to display. The
system log of the server blade
is not stored between reboots,
so the information only
includes what has taken place
since the last power on of the
Integrated Administrator.
Typing “c” cont inuously
displays the System Log
without page breaks.
Group members and group
administrators only see
information for the bays in their
groups.
UNASSIGN BAY [ALL |
<bay number> {[ , |
- ] <bay number>}] Removes the bay(s) from their
assigned group. Only enclosure administrators
may execute this command.
HP ProLiant BL e-Class Integrated Administrator User Guide 4-25
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM