HP ProLiant BL10e G2 Server Blade - Manual (Page 83)

Command Line Interface
Table 4-2: General Management Commands continued
Command Description Restrictions
GENERATE
CERTIFICATE
REQUEST Generates a PKCS#10 certificate request. Only enclosure
administrators may
execute this command.
GENERATE
CERTIFICATE
SELFSIGNED Generates a self-signed certificate. Only enclosure
administrators may
execute this command.
PING
{<number>}
[<IP address>
| <server
name>] Sends ICMP echo messages to a remote IP
device.
If <number> is omitted, only 5 packets are sent.
Packets are sent out at 1-second intervals.
The <IP address> must
be in the form
###.###.###.### where
### ranges from
0 to 255.
SET DISPLAY
EVENTS [ON |
OFF] Turns event notification on or off
The Integrated Administrator preserves this
setting across all logins.
None
SET EXPERT
{MODE} [ON |
OFF] Turns EXPERT MODE on or off. When EXPERT
MODE is turned on, the system will not prompt
the user to confirm actions. Users should
exercise caution when working in EXPERT
MODE as many actions are not reversible. None
SET FACTORY Sets the Integrated Administrator back to its
factory defaults.
The “Administrator” account password does not
change. The Integrated Administrator is
restarted after all the changes are made.
Note: This command removes all groups, users,
and other customization from the memory of the
enclosure, and the information is unrecoverable.
Only the “Administrator”
account may execute
this account.
SET SCRIPT
MODE [ON |
OFF] When SCRIPT MODE is on, all prompting and
verifications of entries ceases.
If SCRIPT MODE is on, the following commands
require a password argument: ADD USER, SET
USER PASSWORD, or SET PASSWORD.
Default values are used for any parameters that
would normally require user interaction.
None
continued
HP ProLiant BL e-Class Integrated Administrator User Guide 4-5
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM