HP ProLiant BL10e G2 Server Blade - Manual (Page 190)

Performing Advanced Functions
HP ProLiant BL e-Class Integrated Administrator User Guide 7-17
HP CONFIDENTIAL
Writer: Hilary Stead File Name: h-ch7 Performing Advanced Functions.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:54 AM
3. When the serial console prompt appears, press the F key.
IMPORTANT: This command is case-insensitive.
Pressing the L key launches Lost Password recovery mode. Pressing any other key exits
Lost Password/Flash Disaster Recovery mode and reboots the system.
This command boots the system in Flash Disaster Recovery mode, prints a
message, and resets the enclosure.
Upon entering Flash Disaster Recovery mode, the Integrated Administrator
attempts to acquire a DHCP address. If successful, the Integrated Administrator
prompts the user for:
— IP address of the TFTP server
— Filename of the ROM on the TFTP server
The Integrated Administrator then downloads and verifies the ROM and updates
the flash memory.
IMPORTANT: No timeout exists for obtaining a DHCP address.
IMPORTANT: If the ROM does not download properly or if the verification step fails,
Flash Disaster Recovery mode restarts with another attempt to acquire a DHCP address.
The Integrated Administrator reboots.