HP ProLiant BL10e G2 Server Blade - Manual (Page 198)

Error Messages
Table B-6: Administration Error Messages continued
Error Message Cause Valid Input
Please set at least the Primary
NTP server before enabling NTP. Attempting to enable the NTP
server before enabling the
primary NTP server set. N/A
<IP address> is already set as
secondary NTP server. Attempting to set the primary
NTP server to <IP address>
when the <IP address> is
already set as secondary. N/A
<IP address> is already set as
primary NTP server. Attempting to set the secondary
NTP server to <IP address>
when the <IP address> is
already set as primary. N/A
Primary NTP server is already
cleared. Attempting to clear the
primary NTP server that has
previously been cleared or
never set. N/A
The secondary NTP server is
already cleared. Attempting to clear the
secondary NTP server that
has previously been cleared
or never set. N/A
Please set the primary NTP
server first. Attempting to set the
secondary NTP server without
first setting the primary NTP
server. N/A
Invalid IP address supplied. IP
address should be in
###.###.###.### or
###.###.###.###/## format
where ### is between 0 and 255
and ## is between 0 and 32. Attempting to set an IP
address that is not in the
correct format. ###.###.###.### where ###
is between 0 and 255 and ##
is between 0 and 32.
Invalid e-mail address supplied.
Address should be in
[email protected] format. Attempting to enter an e-mail
address that is not in the
correct format. E-mail addresses formatted
“[email protected]” and
containing a maximum of 64
characters.
E-mail address is too long.
Length must be less than 65
characters. Attempting to enter an e-mail
address containing more than
64 characters. E-mail addresses formatted
“[email protected]” and
containing a maximum of 64
characters.
HP ProLiant BL e-Class Integrated Administrator User Guide B-7
HP CONFIDENTIAL
Writer: Hilary Stead File Name: j-appb Server Error Messages.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:56 AM