HP ProLiant BL10e G2 Server Blade - Manual (Page 46)

Web-Based User Interface
CAUTION: Both the Web and Secure Shell protocols must be enabled to allow
access to the Web-based user interface.
Table 3-3 describes the information displayed in the areas that comprise the Network
Configuration screen.
Table 3-3: Network Configuration Screen
Field Possible Values Description
Information Area
IP Address The IP address of the Integrated
Administrator
MAC Address The MAC address of the Integrated
Administrator
Protocols Area
Web
(HTTP/HTTPS) Enabled or Disabled
SNMP Enabled or Disabled
Secure Shell Enabled or Disabled
Telnet Enabled or Disabled
The default setting for each of the
protocol radio buttons is Enabled.
For more information on the default
settings of the system , see Appendix
E, “Factory Default Settings.”
Network Area
DHCP Gets the IP address of the Integrated
Administrator from a DHCP server
Static IP Sets a static IP address of the
Integrated Administrator
Dynamic DNS Determines whether the Integrated
Administrator uses Dynamic DNS
IP Address ###.###.###.###, where ###
ranges from 0 to 255 Static IP address for the Integrated
Administrator (mandatory if Static IP
is selected)
continued
3-14 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: d-ch3 Web-Based User Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:42 AM