HP ProLiant BL10e G2 Server Blade - Manual (Page 27)

Getting Started
b. Open a terminal emulation session with the following settings: 9600 bps,
8 data bits, no parity, and 1 stop bit.
c. Log into the Integrated Administrator using the password on the settings tag
attached to the interconnect tray.
2. Establish the Integrated Administrator IP address.
For a detailed explanation of the command line conventions used in this
document, see Appendix A, “Command Line Conventions.”
— If a DHCP server is attached to the network, determine the Integrated
Administrator IP address. Enter the following command at the command line
interface:
SHOW NETWORK
— If a DHCP server is not attached to the network, enter the following
commands sequentially to assign a static IP address to the Integrated
Administrator:
SET IPCONFIG STATIC <IP address> <subnet mask>
SET GATEWAY <IP address>
SET DNS <primary address> {<secondary address>}
You can now access the Integrated Administrator using a web browser, Secure
Shell, Telnet, or SNMP.
2-6 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: c-ch2 Getting Started.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:40 AM