HP ProLiant BL10e G2 Server Blade - Manual (Page 88)

Command Line Interface
Table 4-3: User Account Commands continued
Command Description Restrictions
SET USER
CONTACT
{<user
name>}
<contact
info> If no <user name> exists, the
command modifies the
contact info of the user that
executed the command. Only enclosure administrators may modify
another user’s contact information.
The <user name> is case-sensitive. The
<contact info> must be 0-20 characters
long and can include all alphanumeric
characters, the dash, the underscore, and
spaces.
The default contact information is blank.
If spaces are part of the contact
information, enclose the information in
quotes.
SET USER
FULLNAME
{<user
name>} <full
name> Sets a user’s full name.
If no <user name> exists, the
command modifies the full
name of the user that is
currently logged in.
Only enclosure administrators may modify
another user’s full name.
The <user name> is case-sensitive. The
<full name> must be 0-20 characters long
and can include all alphanumeric, the dash,
the underscore, and space characters.
The default full name is blank.
If spaces are part of this information,
enclose the information in quotes.
SET USER
PASSWORD
<user name>
{<new
password>} Sets a user’s password.
If you do not supply a
password on the command
line, you are prompted for
one.
Note: This command is not
valid in SCRIPT MODE if
password is not specified.
Only enclosure administrators may modify
another user’s password. Only the
“Administrator” account may modify the
password of the “Administrator” account.
The <user name> is case-sensitive. The
<new password> must be 3-8 characters
long and can include all printable
characters.
continued
4-10 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM