HP ProLiant BL10e G2 Server Blade - Manual (Page 97)

Command Line Interface
Table 4-5: Enclosure Management Commands continued
Command Description Restrictions
SHOW
ENCLOSURE
POWERSUPPLY
[<power
supply
number> |
ALL] Displays the power supply status, AC
input status, capacity, input voltage
range #1 (measured in Volts), input
voltage range #2 (if necessary,
measured in Volts), input frequency
range (measured in Hertz), part
number, serial number, and hardware
revision for the specified power supply
if one is specified or for all power
supplies if ALL is given. None
SHOW
ENCLOSURE
STATUS Under an enclosure status heading,
this command displays the health,
Integrated Administrator health, and
unit identification LED of the enclosure.
Under a power status heading, this
command displays the power status
and capacity.
None
SHOW
ENCLOSURE
TEMP Displays the locale, status (OK, warm,
degraded, or failed), temperature in
degrees Fahrenheit, and temperature
in degrees Celsius for all temperature
sensors. None
SHOW RACK
NAME <rack
name> Shows the name for the rack where the
enclosure resides.
The default rack name is
“UnnamedRack.”
None
SHOW SYSLOG
ENCLOSURE Displays the syslog of the enclosure
with 22 lines per screen.
Typing “q” q uits the command; any
other key shows the next screen if
more information exists to display.
Typing “c” cont inuously displays the
System Log without page breaks.
Only enclosure administrators
may execute this command.
SHOW TRAY
INFO Displays the manufacturer, product
name, part number, serial number, and
spare number of the interconnect tray. None
continued
HP ProLiant BL e-Class Integrated Administrator User Guide 4-19
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM