HP ProLiant BL10e G2 Server Blade - Manual (Page 87)

Command Line Interface
Table 4-3: User Account Commands continued
Command Description Restrictions
REMOVE USER
[ALL | <user
name>] Removes a user from the
system
If ALL is specified, the
command is run for all users
except the default system
accounts.
Only enclosure administrators may execute
this command.
The <user name> is case-sensitive. The
“Administrator,” “switcha,” and “switchb”
accounts cannot be removed.
SET GROUP
{DESCRIPTION
} <group
name>
<description
> Sets a group’s description. Only enclosure administrators may execute
this command.
The <group name> is case-sensitive. The
<description> must be 0-20 characters long
and can include all alphanumeric
characters, the dash, the underscore, and
spaces.
The default group description is blank.
If spaces are part of the contact
information, enclose the information in
quotes.
SET PASSWORD
{<password>} Sets the password of the user
currently logged into the
Integrated Administrator.
If a password is not given on
the command line, the user is
prompted for one.
Note: This command is not
valid in SCRIPT MODE if
password is not specified.
The <password> must be 3-8 characters
long and can include all printable
characters.
continued
HP ProLiant BL e-Class Integrated Administrator User Guide 4-9
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM