HP ProLiant BL10e G2 Server Blade - Manual (Page 93)

Command Line Interface
Table 4-4: Enclosure Network Configuration Commands continued
Command Description Restrictions
SET SNMP
LOCATION
<location> Configures the SNMP location of the
enclosure.
The default location is blank.
Only enclosure administrators may
execute this command.
The <location> must be 0-20
characters long and includes all
alphanumeric characters, the
underscore, the dash, and the
space.
If spaces are part of this
information, enclose the information
in quotes.
SHOW
NETWORK Displays the DHCP state, Dynamic
DNS state, IP address, subnet mask,
gateway address, primary and
secondary DNS addresses, MAC
address, HTTP and HTTPS server
status, SNMP status, Secure Shell
status, and Telnet status of the
enclosure. None
SHOW SNMP Displays the SNMP system name,
location, and contact; read community
name; write community name; and a
list of the trap destinations. Only enclosure administrators may
execute this command.
HP ProLiant BL e-Class Integrated Administrator User Guide 4-15
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM