HP ProLiant BL10e G2 Server Blade - Manual (Page 95)

Command Line Interface
Table 4-5: Enclosure Management Commands continued
Command Description Restrictions
SET DATE
MMDDhhmm
{{CC}YY} {TZ} Sets the date of the enclosure with the
following definitions:
• MM: month
• DD: day
• hh: hour (24-hour time)
• mm: minute
• CC: century
• YY: year
• TZ: time zone (case-sensitive)
If the time zone is left blank, the
current time zone is left in effect.
Only enclosure administrators
may execute this command.
• MM is an integer from 1-12.
• DD is an integer from 1-31.
• hh is an integer from 0-23.
• mm is an integer from 0-59.
For a list of time zones, see
Appendix F, “Time Zone
Settings.”
NTP must be disabled before
manually setting the date and
time.
SET ENCLOSURE
ASSET {TAG}
<asset tag> Changes the enclosure asset tag Only enclosure administrators
may execute this command.
The <asset tag> must be 1-31
characters long and includes
alphanumeric, dash, and
underscore characters.
The default enclosure asset tag
is blank. To set a blank asset tag,
specify the blank value using
quotes.
SET ENCLOSURE
NAME
<enclosure
name> Changes the enclosure name Only enclosure administrators
may execute this command.
The <enclosure name> must be
1-32 characters long and
includes all alphanumeric, the
dash, and the underscore
characters.
The default enclosure name is
IA-MAC where MAC is replaced
with the actual MAC address.
continued
HP ProLiant BL e-Class Integrated Administrator User Guide 4-17
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM