HP ProLiant BL10e G2 Server Blade - Manual (Page 117)

Setting Up the System
•
Setting up IP Security
— Adding IP address
— Enabling IP Security
— Disabling IP Security
•
•
Setting up Automatic Time Configuration (NTP)
— Adding primary NTP server
— Adding secondary NTP server
— Setting the poll interval
— Enabling NTP
— Disabling NTP
Configuring SNMP support
— Entering a community string
— Modifying the system location
— Modifying the system contact information
— Adding trap targets
— Removing trap targets
For a detailed explanation of the command line conventions used in this document,
see Appendix A, “Command Line Conventions.”
These procedures are supported by the Web-based user interface and the CLI unless
otherwise noted.
IMPORTANT: Most of these tasks are limited to a subset of users. For more information on
who can perform each task, see the “User Permissions” section and the section describing that
task in this chapter.
5-2 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: f-ch5 Setting Up the System.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:50 AM