HP ProLiant BL10e G2 Server Blade - Manual (Page 193)

Error Messages
Enclosure Warning Messages
Table B-1: Enclosure Warning Messages
Warning Message Cause
Are you sure you want to disable the Web
protocol? Disabling this protocol will prevent
access to the Web-based user interface until a
terminal session re-enables the Web protocol. Attempting to disable the Web (HTTP / HTTPS)
protocol
Are you sure you want to disable the Secure
Shell protocol? Disabling this protocol will
prevent access to the Web-based user interface
and Secure Shell terminal interface until a
terminal session re-enables the Secure Shell
protocol. Attempting to disable the Secure Shell protocol
The SNMP protocol is currently disabled. The
new settings will not take effect until this
protocol is enabled on the Network
Configuration screen. Changing an SNMP value with the SNMP
protocol disabled
The Read Community field is empty. The Read
Community will be set to “public”. The SNMP
protocol may be disabled on the Network
Configuration screen. Attempting to set a blank Read Community
string
Are you sure that you want to power off the
enclosure? Attempting to power off the enclosure
Are you sure that you want to restart the
Integrated Administrator? This process will take
several minutes. Attempting to restart the Integrated
Administrator
Are you sure that you want to clear the system
log? Attempting to clear the system log
Enabling IP Security may disconnect this
session. Are you sure you still want to perform
this action? Attempting to enable IP Security
B-2 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: j-appb Server Error Messages.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:56 AM