HP ProLiant BL10e G2 Server Blade - Manual (Page 99)

Command Line Interface
Server Bay Management Commands
Table 4-6: Server Bay Management Commands
Command Description Restrictions
CLEAR BAY BOOT
[FIRST | ONCE] [ALL
| <bay number> {[ ,
| - ] <bay number>}
]
Clears the setting for the IPL to
be passed to the blade at the
next reboot. The “FIRST”
argument resets the IPL for all
subsequent reboots. The
“ONCE” argum ent resets the
IPL for the next reboot only.
This command is only valid for
present blades.
This command requires BIOS
version 06/15/02 or greater for
the ProLiant BL10e server
blade ROM.
Only enclosure and group
administrators may execute
this command.
CLEAR BAY BOOT
ALWAYS [ALL | <bay
number> {[ , | - ]
<bay number>} ] Clears the setting for the IPL to
be passed to the blade at the
next reboot. This is valid for all
bays, including empty bays. Only enclosure and group
administrators may execute
this command.
CLEAR SESSION BAY
<bay number> Terminates a Terminal session
from the enclosure.
This is not a graceful
termination. The connected
user loses any unsaved work.
Enclosure administrators may
execute this command for
server blade bays and the
interconnect switch.
CONNECT BAY <bay
number> Opens a remote console
session to the server blade
with that server blade bay
number.
A server blade can only
support one remote console
session at a time.
Only enclosure and group
administrators may execute
this command.
continued
HP ProLiant BL e-Class Integrated Administrator User Guide 4-21
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM