HP ProLiant BL10e G2 Server Blade User Manual
Page 121
Setting Up the System
Figure 5-1: Setting the enclosure name and rack name
7. Click Apply.
To modify the enclosure name or rack name using the CLI, enter the following
commands sequentially:
SET ENCLOSURE NAME <enclosure name>
IMPORTANT:
The <enclosure name> must be 1-32 characters long and includes all
alphanumeric, the dash, and the underscore characters.
The default enclosure name is IA-XXXXXXXXXXXX where XXXXXXXXXXXX is replaced with
the actual MAC address
.
SET RACK NAME <rack name>
IMPORTANT: The <rack name> must be a maximum of 32 characters long and includes all
alphanumeric, dash, and underscore characters. The default rack name is “UnnamedRack.”
5-6
HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: f-ch5 Setting Up the System.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:50 AM