HP ProLiant BL10e G2 Server Blade - Manual (Page 104)

Command Line Interface
Command Line Event Messages
Table 4-7: Command Line Event Messages
Message Possible Cause
User Event Messages
User Permission Change One of the following has occurred:
• A user has been added, removed, or modified.
• A user’s group membership has been modified.
The server blade bay membership has been changed for a group
with at least one user.
Enclosure Event Messages
Enclosure Shutdown The enclosure is being shutdown.
Enclosure Status Change The Integrated Administrator detected a change in status due to a
change in the state of one or more hardware components or server
blade readings.
Fan Inserted A fan has been inserted.
Fan Removed A fan has been removed.
Fan Status Change The status of a fan has changed.
Power Supply Inserted A power supply has been inserted.
Power Supply Overload The power subsystem is overloaded. Check each power supply
status to determine cause.
Power Supply Redundancy
Change The power supplies are now either redundant or no longer
redundant.
Power Supply Removed A power supply has been removed.
Power Supply Status
Change The status of a power supply has changed.
Restart Event The Integrated Administrator is about to restart.
Thermal Status Change The state of a thermal sensor has changed.
continued
4-26 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM