HP ProLiant BL10e G2 Server Blade - Manual (Page 133)

Setting Up the System
SET USER FULLNAME {<user name>} <full name>
IMPORTANT: The <full name> must be 0-20 characters long and can include all
alphanumeric characters, the dash, the underscore, and spaces.
SET USER CONTACT {<user name>} <contact info>
IMPORTANT: The <contact info> must be 0-20 characters long and can include all
alphanumeric characters, the dash, the underscore, and spaces.
ASSIGN USER <user name> <group name> {[VIEW | MODIFY]}
Enabling Remote Console Sessions to Server Blades
IMPORTANT: If a server blade is running the Windows 2000 operating system, only
sequences that occur before the loading of the operating system are visible using Remote
Console, unless the server blade is running the HP ProLiant Serial Console for Windows 2000
Server service.
To allow Remote Console access to a server blade, install the HP ProLiant Serial Console for
Windows 2000 Server service, located at
www.compaq.com/support/files/server
The remote console feature of the Integrated Administrator enables a user to connect
to the console (serial) connector of the server blade in order to access the
ROM-Based Setup Utility (RBSU) and operating system of the server blade.
Accessing the RBSU of the server blade requires nothing more than connecting to the
server blade. For detailed instruction to perform this task, see the “Accessing
ROM-Based Setup Utility of a Server Blade” section in Chapter 6, “Performing
Common Administrative Tasks.”
Accessing the operation system for server blades running Linux requires preparatory
steps that vary depending on whether you are using Linux Loader (LILO) or Grand
Unified Boot Loader (GRUB).
5-18 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: f-ch5 Setting Up the System.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:50 AM