HP ProLiant BL10e G2 Server Blade User Manual
Page 175
Performing Advanced Functions
Replicating the Configuration of the Integrated
Administrator
IMPORTANT: The Integrated Administrator does not support this task using the Web-based
user interface.
To set up several enclosures with the same configuration, configure one enclosure
(such as add all user accounts, add all groups, and assign bays) and then replicate that
configuration on the other enclosures.
To replicate the configuration of the Integrated Administrator using the CLI:
1. Login as Administrator on the first enclosure.
2. Enter:
UPLOAD CONFIG <url>
This command uploads the current runtime configuration to the specified TFTP
or FTP server. If your FTP server does not allow anonymous uploading, specify
an FTP username and password using the syntax:
ftp://username:password@ftpserver/filename
3. Edit the uploaded configuration file using a text editor to customize the
configuration (such as usernames, passwords, and network settings) for the other
enclosures.
IMPORTANT: Step 4 only applies if the other enclosures have been configured
previously.
NOTE: For security reasons, passwords are never replicated in the configuration file.
7-2
HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: h-ch7 Performing Advanced Functions.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:54 AM