HP ProLiant BL10e G2 Server Blade - Manual (Page 184)

Performing Advanced Functions
•
To disable automatic time updates, enter:
DISABLE NTP
IMPORTANT: Disabling http/https causes the users to lose access to the Web-based user
interface.
•
•
•
To disable SNMP communication, enter:
DISABLE SNMP
To disable Secure Shell communication, enter:
DISABLE SECURESH
IMPORTANT: Disabling Secure Shell causes the users to lose access to the Web-based user
interface.
To disable telnet communication, enter:
DISABLE TELNET
Upgrading the Integrated Administrator Firmware
The firmware associated with the Integrated Administrator can be upgraded remotely
using the CLI using the management (10/100 Ethernet) connector located on the rear
panel of the enclosure. See Table 4-5, “Enclosure Management Commands,” for
detailed information on the following command used to perform this function:
UPDATE IMAGE <url>
IMPORTANT: <URL> can be any of the following:
• http://host/path
• tftp://host/path
• ftp://username:password@host/path
• ftp://host/path
where host is a fully qualified domain name or an IP address and path is the pathname of the
flash image to download.
HP ProLiant BL e-Class Integrated Administrator User Guide 7-11
HP CONFIDENTIAL
Writer: Hilary Stead File Name: h-ch7 Performing Advanced Functions.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:54 AM