Accessing the web-based user interface, Accessing the web-based user interface -2 – HP ProLiant BL10e G2 Server Blade User Manual
Page 34
Web-Based User Interface
Accessing the Web-Based User Interface
IMPORTANT: Accessing the Web-based user interface is not supported from the console
(serial) connector.
To access the Integrated Administrator Web-based user interface with HTTP:
1. Get the DNS name from the settings tag attached to the interconnect tray.
2. Open a Web browser and enter the IP address or DNS name for the enclosure
you wish to access.
CAUTION: If your network does not provide DHCP and either Dynamic DNS or
WINS services, you need to configure a static IP address. See the “Accessing the
Command Line Interface Locally” section in Chapter 4, “Command Line Interface.”
Figure 3-1: Viewing the Login screen
3. Enter the user name and password at the Login prompt.
3-2
HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: d-ch3 Web-Based User Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:42 AM