HP ProLiant BL10e G2 Server Blade - Manual (Page 82)

Command Line Interface
General Management Commands
Table 4-2: General Management Commands
Command Description Restrictions
CLEAR SESSION
SWITCH [A |
B] Terminates a Terminal session from the
enclosure.
This is not a graceful termination. The
connected user loses any unsaved work.
Group administrators
may only execute this
command for server
blade bays to which
they have access.
CLEAR SSHKEY Removes the contents of the Secure Shell
authorized keys file. After performing this
command, you will not be able to login using
public key-based authentication. Only enclosure
administrators may
execute this command.
CONNECT
SWITCH [A |
B] Opens a remote console connection to switch A
or B.
A single switch cannot support multiple
simultaneous remote console sessions.
Only enclosure
administrators may
execute this command.
DOWNLOAD
CERTIFICATE
<url> Downloads a CA supplied PKCS#7 file to
replace the current security certificate on the
system.
Supported protocols are http, ftp, and tftp. The
URL should be formatted as follows:
protocol://host/path/file
If your ftp server does not support anonymous
connections, you can specify a username and
password by augmenting the host part in the
above format with username:password@host.
Only enclosure
administrators may
execute this command.
DOWNLOAD
SSHKEY Downloands an authorized key file to use with
Secure Shell v2 which can contain the public
keys for any enclosure administrator. Supported
protocols are http, ftp, and tftp. The url should
be formatted as protocol://host/path/file. If your
ftp server does not support anonymous
connections, you can specify a username and
password by replacing the host part in the
previous format with username:password@host. Only enclosure
administrators may
execute this command.
continued
4-4 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM