HP ProLiant BL10e G2 Server Blade - Manual (Page 90)

Command Line Interface
Enclosure Network Configuration Commands
Table 4-4: Enclosure Network Configuration Commands
Command Description Restrictions
ADD SNMP
TRAPRECEIVE
R <IP
address> Adds an IP address to receive SNMP
traps.
Only v1 traps are supported. Traps are
directed to the SNMP default port, 162.
Only enclosure administrators may
execute this command.
A maximum of 8 IP address may be
added to receive SNMP traps.
The <IP address> must be in the
form ###.###.###.### where ###
ranges from 0 to 255.
DISABLE
SECURESH Disables Secure Shell access to the
Integrated Administrator.
Disabling Secure Shell prevents
access to the Web-based user
interface and the Secure Shell terminal
interface until a terminal session re-
enables the Secure Shell protocol.
Only enclosure administrators may
execute this command.
DISABLE
SNMP Disables SNMP support for the
Integrated Administrator.
Does not clear the SNMP trap
receivers that have been configured.
SNMP trap receivers can still be added
and removed. If SNMP is disabled,
Insight Manager agents do not work
properly.
Only enclosure administrators may
execute this command.
DISABLE
TELNET Disables Telnet access to the
Integrated Administrator. Only enclosure administrators may
execute this command.
DISABLE WEB Disables HTTP and HTTPS access to
the Integrated Administrator.
This command prevents access to the
Web-based user interface.
Only enclosure administrators may
execute this command.
continued
4-12 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM