HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 114)

Command line 114
Item Description
show sflow-receiver Display the receiver name.
Syntax
show sflow-receiver [<ReceiverName|*>]
Parameter
ReceiverName
(optional)
The name of an existing sflow receiver in the domain. A receiver name of "*"
displays all the receivers.
Examples
->show sflow-receiver
Displays the sflow receiver
snmp-access
Manage SNMP access.
Supported actions: add, help, remove, show
Item Description
add snmp-access Add new ranges of IP addresses that will be permitted to access VC Ethernet
modules through the SNMP interface.
Syntax
add snmp-access Network=<IP Address/Netmask Bits>
Parameter
Network (required) The network IP address in the format IP Address/Netmask Bits. The IP
address must be unique and the starting address of an IP subnet range.
Example
->add snmp-access Network=192.168.0.0/24
->add snmp-access Network=2001::1/64
Adds a new range(s) of IP addresses
Item Description
remove snmp-access Remove already configured range(s) of IP addresses that were permitted to
access VC Ethernet modules through the SNMP interface.
Syntax
remove snmp-access Network=<IP Address> | *
Parameter
Network (required) The network IP address of a configured SNMP access
Examples
->remove snmp-access Network=192.168.0.0
->remove snmp-access Network=2001::1
Removes a range(s) of IP addresses
->remove snmp-access *
Removes all configured ranges of IP addresses
Item Description
show snmp-access Display the ranges of IP addresses that are already configured to access VC
Ethernet modules using the SNMP interface.
Syntax
show snmp-access
Example
->show snmp-access
Displays all configured ranges of IP addresses