HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 43)

Command line 43
Item Description
also be specified. Values include "Factory-Default", "User-Defined", or
"Pool-Specified".
IMPORTANT: "User-Defined" addresses within the domain address pool range
are permanently depleted from the pool and can only be re-used as
"User-Defined". Deleting the profile does not return the address to the pool.
Deleting the domain is the only way to return "User-Defined" addresses to the
pool.
To use the "Pool-Specified" option, the domain WWN pool must be defined as
VC-defined or user-defined and the listed addresses must be available in the
current pool.
PortWWN (required if
AddressType is
User-Defined or
Pool-Specified)
The user-defined Port WWN address to use for the connection. This property is
required if the AddressType specified is "User-Defined" or "Pool-Specified". The
PortWWN must be an unused WWN address.
NodeWWN (required if
AddressType is
User-Defined or
Pool-Specified)
The user-defined Node WWN address to use for the connection. This property
is required if the AddressType specified is "User-Defined" or "Pool-Specified".
The NodeWWN must be an unused WWN address.
Examples
->add fc-connection MyNewProfile Fabric=SAN_5
Adds a new FC SAN connection to a profile
->add fc-connection MyNewProfile Fabric=SomeFabric
Speed=4Gb
Adds a new FC SAN connection and configures the port speed
->add fc-connection MyNewProfile
Adds a new FC SAN connection and uses the next available fabric
->add fc-connection MyNewProfile
AddressType=Factory-Default
Adds a new FC SAN connection and uses factory-default addresses
->add fc-connection MyNewProfile AddressType=User-Defined
PortWWN=50:06:0B:00:00:C2:62:00
NodeWWN=50:06:0B:00:00:c2:62:01
Adds a new FC SAN connection and provides user-defined WWN addresses
->add fc-connection MyNewProfile
AddressType=Pool-Specified
PortWWN=50:06:0B:00:00:C2:62:00
NodeWWN=50:06:0B:00:00:c2:62:01
Adds a new FC SAN connection and specified an address from the VC-defined
or user-defined pool
Item Description
remove fc-connection Remove the last FC connection from an existing server profile.
Syntax
remove fc-connection <ProfileName>
Parameter
ProfileName (required) Name of the profile from which to remove the FC connection
Example
->remove fc-connection MyProfile
Removes an FC connection from a profile
Item Description
set fc-connection Modify an existing FC SAN connection.