HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 76)

Command line 76
Item Description
[PrefSpeedType=<auto|custom>] [PrefSpeed=<100Mb-20Gb
in 100Mb steps>] [MaxSpeedType=<unrestricted|custom>]
[MaxSpeed=<100Mb-20Gb in 100Mb steps>]
[Nags=<Name1>[<Name2>,...]
[SmartLink=<enabled|disabled>]
[Labels=<Label1>[<Label2>,...]
[Color=<red|green|blue|orange|purple>]
Options
quiet This option suppresses user confirmation prompts. This option is useful
when scripting operations.
Properties
UplinkSet (required) The name of an existing shared uplink port set to use with the new
networks
VLANIds (required) A comma separated list of VLAN ranges. The VLAN IDs must not overlap
or already be used in the uplink port set. The VLAN IDS are combined with
the NamePrefix and NameSuffix properties (if any) to create the name for
the networks.
NamePrefix (optional) The string to prefix before the VLAN ID when naming the new networks. If
omitted, no string is used to prefix the VLAN ID.
NameSuffix (optional) The string to add after the VLAN ID when naming the new networks. If
omitted, no string is added after the VLAN ID.
State (optional) Enables or disables the networks. Valid values are "Enabled" and
"Disabled". The default value is "Enabled".
PrefSpeedType (optional) The default connection speed for any Ethernet connection attached to
these networks. Valid values include "Auto" and "Custom". "Custom"
enables you to configure the preferred speed. The default value is "Auto".
PrefSpeed (required if
PrefSpeedType is "Custom")
The connection speed for any Ethernet connection attached to these
networks. Valid values range from 100Mb to the MAX configured speed
for the network in 100Mb increments.
MaxSpeedType (Optional) The maximum connection speed for any Ethernet connection attached to
these networks. Valid values include "Unrestricted" and "Custom".
"Custom" enables you to configure the preferred speed. The default value
is "Unrestricted".
MaxSpeed (required if
MaxSpeedType is "Custom")
The maximum connection speed for any Ethernet connection attached to
these networks. Valid values range from 100Mb to the MAX configured
speed for the network in 100Mb increments.
Nags (optional) The network access groups to which the networks belong, separated by
commas. Do not use spaces unless they are enclosed in quotation marks.
If no network access groups are specified, the domain default network
access group (Default) is used.
SmartLink (optional) Enables or disables the SmartLink capability for the networks. Valid values
include "Enabled" and "Disabled".
Labels (optional) Labels assigned to these networks. Labels are used in the GUI to help with
management of large numbers of networks. Labels can be assigned in the
CLI, but are only used in the GUI. A maximum of 16 labels can be
assigned.
Color (optional) Color assigned to these networks. Color is used in the GUI to help manage
large numbers of networks. A color can be assigned in the CLI, but is only
used in the GUI. Red, green, blue, purple, or orange are allowed.
Examples