HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 126)

Command line 126
• Priority-based Flow Control (PFC)
• Application Protocol (AP)
The following table lists the type of DCBX statistics displayed.
Item Description
DCBX Application Protocol State
<enabled or disabled>
DCBX Overall Status <OK, Failed, Unknown>
DCBX Pending Status <false, true, or negotiating in progress>
DCBX Priority Flow Control State <Status>
DCBX Priority Group State <Status>
DCBX Application Protocol State <Status>
The following table defines each statistic.
Item Description
disabled
The feature is operationally disabled.
ok The feature is configured properly or DCBX negotiation is in progress.
incompatible cnfg A FlexFabric network adapter has an incompatible configuration and is not
accepting changes.
peer_disabled A FlexFabric network adapter reports that the feature is not enabled.
Does not support dcbx A FlexFabric network adapter does not indicate that it supports the feature.
Not advertising dcbx support A FlexFabric network adapter is not running DCBX within the expired
period.
Error during cnfg A FlexFabric network adapter reported an error configuring the feature.
Not accepting changes A FlexFabric network adapter reported an error configuring the feature.
statistics-throughput
Manage the port throughput statistics.
Supported actions: help, show, set
Item Description
show statistics-
throughput
Display throughput information for the specified physical port, FlexNIC, and the
aggregated throughput information for the specified LAG.
Syntax
show statistics-throughput <config|PortID>
[LAGID=<encXX:BayNumber:lagNN>]
Parameters
PortID (optional) The port ID of the port/subport for which to display throughput information. PortID is
composed of
<EnclosureID>:<BayNumber>:<PortLabel>[:<SubportLabel>]. For
QSFP+ ports, the <PortLabel> format is Q<x>.<y>. Port throughput collection must
be enabled for the domain by issuing the set statistics-throughput
command. A column that contains an "R" indicates that the statistics were reset by the
user during that time period; therefore, the throughput is not available for that time
period.
config (required
if PortID is not
specified)
Displays the current configuration of throughput statistics