HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 26)

Command line 26
Item Description
address=<tftp://ipaddress/[filename] |
ftp://user:password@ipaddress/[filename]>
[encryptionkey=<secret password>]
Option
maskEncryptKey
(optional)
Enables you to interactively specify the encryption key as a masked string at the
command prompt
Properties
Address (required) A valid IP address of a TFTP or FTP server with user name and password (where
needed) and the name of the configuration backup file. If not specified, the
default file name is "vc-config-backup". The file path specified is treated as
relative to the login directory for the user on the FTP server. Be sure that the
permissions are appropriate for a successful transfer.
EncryptionKey
(optional)
A password used to encrypt the configuration backup file
Examples
->save configbackup
address=tftp://192.168.10.12/new-vc-config-backup
->save configbackup
address=tftp://[2001::50]/new-vc-config-backup
Saves a configuration backup file to a remote TFTP server
->save configbackup
address=ftp://user:[email protected]/new-vc-config-b
ackup
->save configbackup
address=ftp://user:password@[2001::50]/new-vc-config-back
up
Saves a configuration backup file to a remote FTP server
->save configbackup
address=ftp://user:[email protected]/new-vc-config-b
ackup encryptionkey=secret
->save configbackup
address=ftp://user:password@[2001::50]/new-vc-config-back
up encryptionkey=secret
Saves a configuration backup file to a remote FTP server with an encryption key
->save configbackup -maskEncryptKey
address=ftp://user:[email protected]/new-vc-config-b
ackup
->save configbackup -maskEncryptKey
address=ftp://user:password@[2001::50]/new-vc-config-back
up
Saves a configuration backup file to a remote FTP server with a masked
encryption key
->save configbackup
address=ftp://user:[email protected]:2000/new-vc-con
fig-backup
->save configbackup
address=ftp://user:password@[2001::50]:2000/new-vc-config
-backup
Save a configbackup file to a remote FTP server with a user-specified port number
connection-map
Display server-to-target connectivity information for servers with assigned profiles containing DirectAttach
fabrics.