HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 95)

Command line 95
Item Description
Syntax
show qos-map [<Type> | *]
Parameter
Type (optional) Type of map. Valid values are "DOT1P" and "DSCP". If the type is not specified,
all maps are displayed.
Examples
->show qos-map DSCP
Displays DSCP mapping
->show qos-map DOT1P
Displays DOT1P mapping
->show qos-map
Displays all classification mappings
qos
Manage the quality of service configurations.
Supported actions: help, reset, set, show
Item Description
reset qos Reset the currently active and saved QoS configuration to the default configuration.
You are prompted for confirmation unless you specify the quiet option.
Syntax
reset qos [-active | <Type> | *] [-quiet]
Parameter
Type (required if
Active is not
specified)
Resets the classes, maps, and classifiers for the specified Qos configuration type.
The supported types are "Passthrough", "CustomWithFCoE", or "CustomNoFCoE".
If '*' is specified, then all three QoS configurations are reset to the factory default
settings, and the QoS configuration type is set to "Passthrough".
Options
Active Resets the classes, maps, and classifiers of the active QoS configuration. The active
QoS configuration is the configuration selected using the set qos command. This
option cannot be used in conjunction with the Type parameter.
quiet Suppresses user confirmation prompts
Examples
->reset qos -active
Resets the active QoS configuration type to the factory default settings but does not
change the saved configuration types
->reset qos CustomWithFCoE
Resets the specified QoS configuration type to the factory default settings but does
not change the saved configuration types
->reset qos *
Resets the active QoS configuration type to "Passthrough", and resets all the saved
configuration types to the factory default settings. You are prompted to confirm the
operation.
->reset qos * -quiet
Resets the active QoS configuration type to "Passthrough", and resets all the saved
configuration types to the factory default settings
Item Description
set qos Sets the specified QoS configuration as the active configuration. After the active
QoS configuration is set, use the following commands to configure the