HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 194)

Configuring the Virtual Connect domain using the CLI 194
Logging out of the CLI
To log out of the CLI, use the exit command:
>exit
Common management operations
The following table provides the syntax for the most commonly used management operations.
For more information on a particular command, see "Managed elements (on page
17 )."
Operation Examples
Display general domain settings
>show domain
Display predefined address pools
>show domain addresspool
Display interconnect modules • Summary display
>show interconnect
• Detailed display
>show interconnect *
• Single module display
>show interconnect enc0:2
Display overall domain status
>show status
Display stacking link configuration and status >show stackinglink
Display the system log
>show systemlog
Display a list of servers in the domain • Summary display
>show server
• Detailed display
>show server *
• Single server display
>show server enc0:1
Display server profiles • Summary display
>show profile
• Detailed display
>show profile *
• Single profile display
>show profile MyProfile
Delete the domain configuration
>delete domain
Force a failover to the backup VC Manager
>reset vcm - failover
Power off server blades
>poweroff server enc0:2
>poweroff server *
Power on server blades
>poweron server enc0:1
>poweron server *
Reset a server blade
>reboot server enc0:4
>reboot server *
Unassign a server profile from a device bay
>unassign profile MyProfile
Modify Ethernet network connection properties >set enet-connection MyProfile 1 pxe=disabled
Modify FC fabric connections
>set fc-connection MyProfile 2 speed=auto