HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 63)

Command line 63
Item Description
Interval (required) FC login re-distribution interval for uplinks (in seconds). Valid values include
positive integers in the range 1 to 1800. The default is 30 seconds.
Example
->set link-dist-interval interval=10
Sets the FC login re-distribution interval to 10 seconds
Item Description
show
link-dist-interval
Display the FC login re-distribution interval for uplinks that are part of a fabric
configured for Automatic login redistribution.
Syntax
show link-dist-interval
Example
->show link-dist-interval
Displays the FC login re-distribution interval
lldp
Display LLDP information received on a specified port.
Supported actions: help, show
Item Description
show lldp Display LLDP information received on the specified port.
Syntax
show lldp <PortID>
Parameter
PortID (required) The port ID of the port for which to display LLDP information. PortID is composed
of <EnclosureID>:<BayNumber>:<PortLabel>.
A listing of the possible uplink PortIDs can be obtained by entering the show
uplinkport command. Module downlink PortLabels range from d1 through
d16, depending on the enclosure configuration.
Example
->show lldp enc0:1:X1
Displays LLDP information received on port X1 of the module in bay1 of enclosure
enc0
->show lldp enc0:1:Q1.1
Displays LLDP information received on QSFP+ port Q1.1 of the module in bay 1
of enclosure enc0
local-users
Modify the local user authentication settings for the VC domain.
Supported actions: help, set, show
Item Description
set local-users Modify the local user authentication settings for the VC domain.
Syntax
set local-users [Enabled=<true|false>]
[PrimaryRemoteAuthenticationMethod=<none|ldap|radius|
tacacs>]