HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 116)

Command line 116
Item Description
->add snmp-trap MyTrap Address=192.112.42.5 Severity=All
FcCategories=All DomainCategories=All
Adds a trap with all severity and category properties set. Severities are allowed
even though FC categories are set, but the severities are applied to the domain
categories.
Item Description
remove snmp-trap Removes a previously configured SNMP trap destination.
Syntax
remove snmp-trap <Name|*>
Parameter
Name (required) The name of the trap destination to be removed. Use "*" to remove all traps.
Examples
->remove snmp-trap MyTrap1
Removes an SNMP trap destination
->remove snmp-trap *
Removes all configured SNMP trap destinations
Item Description
set snmp-trap Modifies an existing SNMP trap destination.
Syntax
set snmp-trap <TrapName> [Name=<trap destination
name>][Address=<IPAddress|DNSname>] [Community=<community
name string>][Format=<SNMPv1 | SNMPv2>][Severity=<trap
severity | All|None>][DomainCategories=<domain trap category
| All|None>][EnetCategories=<enet trap category |
All|None>][FcCategories=<fc trap category | All|None>]
Parameter
TrapName (required) The name of the trap to be modified
Properties
Name New name of the trap.
Address (required) IP address or DNS name for the trap destination.
Community (optional) The SNMP community name string for the specified trap. For VC-Enet modules, the
maximum string length is 39. For VC-FC modules, the maximum string length is 24.
If not specified, the default community name is "public".
Format Format of the new trap. Values are "SNMP1v" and "SNMPv2". The default is
"SNMPv1".
Severity Trap severities to send to the destination. Values are "Normal", "Unknown", "Info",
"Warning", "Minor", "Major", "Critical", "All", and "None". Multiple severities
can be specified, separated by commas. The default severity is "None".
DomainCategories The VC domain trap categories to send to the destination. Values are "Legacy",
"DomainStatus", "NetworkStatus", "FabricStatus", "ProfileStatus", "ServerStatus",
"EnetStatus", FcStatus", "All", and "None".
Multiple categories can be specified, separated by commas.
EnetCategories The VC Ethernet trap categories to send to the destination. Values are "PortStatus",
"PortThreshold", "Other", "All", and "None". Multiple categories can be specified,
separated by commas.
FcCategories The VC Fibre Channel trap categories to send to the destination. Values are
"PortStatus", "Other", "All", and "None". Multiple categories can be specified,
separated by commas.
Examples
->set snmp-trap MyTrap1 Community=public