HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 120)

Command line 120
Item Description
-or-
load ssl-certificate
Address=<ftp://user:password@ipaddress>
Filename=<name>
Properties
Address (required) A valid IP address of the FTP server, with user name, password, and name of
the SSL certificate file to transfer.
Place brackets around the IPv6 address in the FTP URL.
Filename (required) The name of the SSL certificate file to transfer. The filename can also be
mentioned separately.
The file path given will be treated as relative to the login directory for the user
on the FTP server. The user should ensure that the permissions are
appropriate for the transfer to succeed.
Examples
->load ssl-certificate
Address=ftp://user:[email protected]/my-new-ssl.
crt
Transfers a new custom SSL certificate from the remote FTP server
->load ssl-certificate
Address=ftp://user:[email protected]
Filename=my-new-ssl.crt
Transfers a new custom SSL Certificate from the remote FTP server
->load ssl-certificate
Address=ftp://user:password@[2001:1::1]/my-new-ssl.cr
t
Transfers a new custom SSL certificate from the remote FTP server using an
IPv6 address
->load ssl-certificate
Address=ftp://user:password@[2001:1::1]
filename=/my-new-ssl.crt
Transfers a new custom SSL certificate from the remote FTP server using an
IPv6 address
Item Description
show ssl-certificate Display the VC web server SSL certificate information. Use "*" to display
detailed SSL certificate information.
Syntax
show ssl-certificate [*]
Examples
->show ssl-certificate
Displays SSL certificate information
->show ssl-certificate *
Displays detailed SSL certificate information
ssl-csr
Generate and transfer an SSL certificate signing request to a remote FTP server.
Supported actions: help, save
Item Description
save ssl-csr Generate and transfer an SSL certificate signing request to a remote FTP
server. If the private key size is 1024 bits, then this command upgrades the