HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 22)

Command line 22
Item Description
Examples
->stop auto-deployment
Stops an in-progress deployment operation
banner
Manage the login screen banner configuration.
Supported actions: add, help, remove, show
Item Description
add banner Add banner text to the login screen. You can access VCM through ssh or the OA.
After banner text is added, the banner is displayed before the user credential
prompt when VCM is accessed.
Syntax
add banner text=[”<banner text>”|’<banner text>’]
Properties
text (required) The text to display on the login in screen. Multi-line banner text can be entered
through multiple add banner commands. New lines are appended to existing
text. The banner text limit is 1500 bytes. If the accumulated banner text length
exceeds 1500 bytes, either from one or multiple add banner commands, an
error message appears. Only printable characters are allowed.
Examples
->add banner text="This is a private system, unauthorized
access is not allowed."
Adds banner text with a single command
->add banner text="This is a private system."
->add banner text=""
->add banner text="Unauthorized access is prohibited."
->add banner text=""
->add banner text="Communications are monitored."
Adds banner text with multiple commands (A blank line is displayed in between
each line of text in this example.)
Item Description
remove banner Remove configured banner text.
Syntax
remove banner
Example
->remove banner
Removes the configured banner text
Item Description
show banner Display the configured banner text.
Syntax
show banner
Example
->show banner
Displays the configured banner text