HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 45)

Command line 45
Item Description
ConnectionID
(optional)
The ID of an existing FC SAN connection. The ID format is <ProfileName:Port>.
Use <ProfileName:*> to display all FC SAN connections of a profile. Use "*" to
display all FC SAN connections in the domain.
Examples
->show fc-connection
Displays all FC SAN connections in the domain
->show fc-connection Profile1:*
Displays all FC SAN connections of a profile named Profile1
->show fc-connection Profile1:1
Displays a specific FC SAN connection of a profile named Profile1
fcoe-connection
Manage FCoE connections.
Supported actions: add, help, remove, set, show
Item Description
add fcoe-connection Add a new FCoE connection to an existing server profile. For more information,
see "General requirements for adding FC or FCoE connections (on page 191 )."
If the QoS type for the domain is set to "CustomNoFcoe", a "cannot add fabric
when QoS configuration type is CustomNoFCoE" error message appears. For
more information about setting the QoS type, see "qos (on page 95 )."
Syntax
add fcoe-connection <ProfileName>
[Fabric=<FabricName>|FcoeNetwork=<FcoeNetName>]
[SpeedType=<1Gb|2Gb|4Gb|8Gb|Auto|Custom|Preferred|Disabl
ed>] [CustomSpeed=<100Mb-8Gb|20Gb>]
[WWNAddressType=<Factory-Default|User-Defined|Pool-Speci
fied>] [PortWWN=<WWN address>] [NodeWWN=<WWN address>]
[MACAddressType=<Factory-Default|User-Defined|Pool-Speci
fied>] [EthernetMac=<MAC Address>]
Parameter
ProfileName (required) The name of an existing profile to which the new connection is added
Properties
Fabric (optional) The name of an existing fabric created on an FCoE module to associate with the
connection. If the fabric name is not specified, the connection is marked as
“Unassigned” and associated with a specific bay.
FcoeNetwork (optional) The name of an existing FCoE network to associate with the connection.
You cannot specify both Fabric and FcoeNetwork properties. If neither property
is specified, then the connection is marked as "Unassigned" and is associated
with a specific bay.
SpeedType (optional) The requested operation speed for the server port. Valid values are "1Gb",
"2Gb", "4Gb", "8Gb", "Auto", "Custom", "Preferred", and "Disabled". The
default value is "Preferred". "Auto" does not apply to fabrics, and "1Gb" to
"8Gb" does not apply to FCoE networks.
If the SpeedType is "Custom", you can configure a speed from 100Mb to MAX
configured speed for the network in 100Mb increments.
If the speed type is "Preferred", the speed of the FCoE connection is the same as
the preferred speed of the fabric or FCoE network to which the connection is
associated. If no preferred speed is configured for a fabric or FCoE network,
Virtual Connect determines the speed.
CustomSpeed (required The user-defined speed for the server port. Valid values include 100Mb to