HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 49)

Command line 49
Item Description
Syntax
show fcoe-connection [<ConnectionID>]
Parameter
ConnectionID
(optional)
The ID of an existing FCoE connection. The ID format is <ProfileName:Port>.
Use <ProfileName:*> to display all FCoE connections of a profile. Use "*" to
display all FCoE connections in the domain.
Examples
->show fcoe-connection
Displays all FCoE connections in the domain
->show fcoe-connection Profile1:*
Displays all FCoE connections of a profile named Profile1
->show fcoe-connection Profile1:1
Displays a specific FCoE connection of a profile named Profile1
firmware
Display the Virtual Connect interconnect module firmware version.
Support actions: help, show
show firmware Display the firmware information for all interconnect modules in the domain.
Syntax
show firmware
Examples
->show firmware
Displays a summary listing of all firmware
->show firmware *
Displays a detailed listing of all firmware
To update firmware, use the HP BladeSystem c-Class Virtual Connect Support Utility. For more information on
installing the firmware, see the HP BladeSystem c-Class Virtual Connect Support Utility documentation on the
HP website ( http://www.hp.com/go/vc/manuals ).
igmp-group
Display interconnect module IGMP Group table information.
Supported actions: help, show
Item Description
show igmp-group Display interconnect module IGMP Group table information for the specified module.
Syntax
show igmp-group <ModuleID>
Parameter
ModuleID
(required)
The ID of the module for which to display the IGMP Group table. The ID is in the format
of <EnclosureID>:<BayNumber>.
Example
->show igmp-group enc0:1
Displays the IGMP Group information for the module in bay 1 of enclosure enc0
igmp