HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 99)

Command line 99
Item Description
server. RADIUS authentication will not work if the server key is blank or null.
Timeout (optional) The time in seconds that VCM should wait before timing out the request. If the
primary server times out and a secondary server is configured, VCM attempts the
request on the secondary server. If the secondary server times out, the request
fails. The valid range of values is from 1 to 600 seconds. The default timeout is 10
seconds.
SecondaryServer
Address (optional)
The IP address or host name of the secondary RADIUS server used for
authentication
SecondaryPort
(optional)
The UDP port to use for RADIUS communication. Valid values include a valid port
number between 1 and 65535. The default UDP port number is 1812.
SecondaryServerKey
(optional)
The plain-text string used to encrypt user details exchanged with the secondary
RADIUS server. It must match the server key configured for this VC on the
secondary server. The RADIUS authentication will not work if the shared key is
blank or null.
SecondaryTimeout
(optional)
The timeout value in seconds for RADIUS communication with the secondary
server
Examples
->set radius -test Enabled=true ServerAddress=192.168.0.27
->set radius -test Enabled=true ServerAddress=2001::70
Tests the RADIUS configuration changes without applying them
->set radius Enabled=true ServerAddress=192.168.0.124
ServerKey=test123 SecondaryServerAddress=radserver.hp.com
SecondaryServerKey=test456
->set radius Enabled=true ServerAddress=2001::40
ServerKey=test123 SecondaryServerAddress=radserver.hp.com
SecondaryServerKey=test456
Enables RADIUS authentication for users
Item Description
show radius Display the Virtual Connect RADIUS authentication settings.
Syntax
show radius
Example
->show radius
Displays RADIUS information
role
Manage role-based user authentication.
Supported actions: help, set, show
Item Description
set role Configure the authentication order or permitted operations for a VC role.
Syntax
set role <RoleName> Order=<order> Operations=<operations>
Parameter
RoleName (required) The VC privilege/role for which the existing authentication order is to be set.
Valid values are "domain", "network", "server", and "storage".
Property
Order (optional) The order of authentication to be set for a given role, specified as one or more