HP Vectra VL 6xxx series 8 - Manual (Page 18)

1 Starting DiagTools
Installing and Setting Up DiagTools
6 English
3 Change to the directory where you extracted the DiagTools package.
For example cd \dmi\hpdiags\light
4 Type
diaginst a: (if your floppy disk drive is “A:”)
or
diaginst b: (if your floppy disk drive is “B:”)
and follow the instructions on your screen.
NOTE
Please check for a README file in the directory where you extracted
the DiagTools package. The information contained in this file
supersedes any information given in this manual.
Updating DiagTools Remotely
(For Network Administrators)
If you are a network administrator, you can update the Hardware
Diagnostics files on remote client PCs using HP TopTools for Desktops.
Using TopTools Ver. 2.5x
Management Console
To update the Diagnostics files on remote PCs, select the DiagTools
page of TopTools, click the Update button, and follow the instructions.
Using TopTools for
Desktops Device
Manager
To update the Diagnostics files on remote PCs, open the TopTools for
Desktops Device Manager in Internet Explorer (version 4.01 or above).
Click on
Devices>Device Types , and select Personal Computers in
the window that appears. Use shift-click or control-click to select the
DMI 2.x compliant PCs you want to update and right-click. Select
System Software>Distribute Diagnostics from the menu that
appears and follow the instructions on your screen.
For more information about using TopTools, refer to the TopTools
online help in the
Help menu and to HP’s Web site at
http://www.hp.com/go/manageability /.
guard.bk : guard1.fb4 Page 6 Wednesday, June 30, 1999 3:06 PM