HP Vectra VL 6xxx series 8 - Manual (Page 64)

Appendix A The Error Codes
0100h – 01A4h: Memory Error Codes
52 English
0150h Failure at XXXXXXXXh, bit position bbh. Memory error.
Replace appropriate memory module.
0160h There is an address short between bit xxh
and yyh. Processor or system board error.
Check that the processor is correctly installed.
If error persists, install new processor.
0170h RAM Refresh is not working. System timer error.
Install new system board.
0171h –
0172h RAM Refresh is slower or faster than
expected. System timer error.
Install new system board.
0180h The pattern written at address
XXXXXXXXh was qqqqh. The pattern
read back from that address was pppph. Memory error.
Replace appropriate memory module.
0181h No Active External Cache Memory. Cache memory error.
Enable external cache memory from BIOS setup.
0182h No extended memory available from
HIMEM.SYS Memory error.
Replace appropriate memory module.
0183h No extended memory detected. Memory error.
Replace appropriate memory module.
0184h Data bus test failed Install new system board.
0190h Test failed at address xxxxxxxxh. Memory error.
Replace appropriate memory module.
01A0h The pattern written at XXXXXXXXh was
qqqqh. The pattern read back from that
address was pppph. Memory error.
Replace appropriate memory module.
01A1h Configuration access mechanism test
failed. Install new processor.
01A2h TagRAM control register test failed. Install new processor.
Code Explanation Details/Parts to Check
guard.bk : g-e-ref1.fb4 Page 52 Wednesday, June 30, 1999 3:06 PM