HP Vectra VL 6xxx series 8 - Manual (Page 57)

English 45
Appendix A The Error Codes
0001h – 00CCh: System Error Codes
0020h NDP (Numeric Data Processor) is not
ready. Processor error.
Check that the processor is correctly installed.
If the error persists, install new processor.
0021h Cannot reset the NDP. Processor error.
Check that the processor is correctly installed.
If the error persists, install new processor.
0022h –
0025h NDP control word read or write error. Processor error.
Check that the processor is correctly installed.
If the error persists, install new processor.
0026h Cannot reset the NDP control word. Processor error.
Check that the processor is correctly installed.
If the error persists, install new processor.
0027h NDP Tag word read or write error. Processor error.
Check that the processor is correctly installed.
If the error persists, install new processor.
0028h NDP stack read or write error. Processor error.
Check that the processor is correctly installed.
If the error persists, install new processor.
0029h –
002Ah NDP operation status has failed. Processor error.
Check that the processor is correctly installed.
If the error persists, install new processor.
002Bh Integer load or store error. Processor error.
Check that the processor is correctly installed.
If the error persists, install new processor.
002Ch NDP Tag word read or write error. Processor error.
Check that the processor is correctly installed.
If the error persists, install new processor.
Code Explanation Details/Parts to Check
guard.bk : g-e-ref1.fb4 Page 45 Wednesday, June 30, 1999 3:06 PM