HP Vectra VL 6xxx series 8 - Manual (Page 76)

Appendix A The Error Codes
0500h – 0590h: SCSI Error Codes
64 English
0521h CD-ROM read error. SCSI CD-ROM error.
Insert a CD-ROM into the CD-ROM drive.
0523h CD-ROM play error. SCSI CD-ROM error.
Insert an audio CD into the CD-ROM drive.
0524h CD Selftest error. SCSI CD-ROM error.
Insert a CD-ROM into the CD-ROM drive.
0525h CD Open error. SCSI CD-ROM error.
Check if SCSI CD drive supports the Open command.
If error persists, install new SCSI CD-ROM drive.
0526h CD Close error. SCSI CD-ROM error.
Check if SCSI CD drive supports the Close command.
If error persists, install new SCSI CD-ROM drive.
0527h CD buffer error. Install new CD-ROM drive.
0528h Pattern compare failed. Data read from sector is incorrect.
0550h Read timeout. SCSI device error
Check the selected SCSI device is connected and
configured correctly.
If error persists, replace SCSI device.
0560h File not found. Check that the referenced file exists.
0580h Cannot allocate memory. Diagnostic test error.
Remove any installed device drivers and restart the
PC or PC Workstation.
Re-run the diagnostic tests.
0590h Command not supported. The command is not supported by the device.
No action needed.
Code Explanation Details/Parts to Check
guard.bk : g-e-ref1.fb4 Page 64 Wednesday, June 30, 1999 3:06 PM