HP Vectra VL 6xxx series 8 - Manual (Page 69)

English 57
Appendix A The Error Codes
0301h – 03FFh: Floppy Disk Error Codes
0301h – 03FFh: Floppy Disk Error Codes
02F5H Number of blocks error. Format, or re-format, the partition.
If error persists, install new hard disk drive.
02FFh Disk data read/write error. Hard disk or hard disk controller error.
Check your hard disk drive is installed correctly.
Install new hard disk drive.
If error persists, install new system board.
Code Explanation Details/Parts to Check
0301h Undefined or invalid command in
sequential test. Floppy disk drive or floppy disk controller error.
Check your floppy disk drive is installed correctly.
Install new floppy disk drive.
If error persists install new system board.
0302h Address mark not found in sequential
test. Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.
0303h Disk is write-protected. Diskette error.
Remove write protection from diskette.
If error persists, replace diskette.
0304h Requested sector not found in sequential
test. Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.
0305h Reset failed in sequential test. Floppy disk controller error.
Check your floppy disk drive is installed correctly.
If error persists, install new system board.
Code Explanation Details/Parts to Check
guard.bk : g-e-ref1.fb4 Page 57 Wednesday, June 30, 1999 3:06 PM