HP Vectra VL 6xxx series 8 User Manual
Page 42
4 Advanced System Tests
Batch Tests
30
English
Selecting Batch Tests
First, you must configure the batch test. To do this, use the
Edit Batch
Parameters
submenu in the
Batch
menu. The
Edit Batch
Parameters
submenu has these commands:
•
Batch Parameters
: to configure the test mode, time limit, and
number of passes.
•
Repeat Count
: This command allows you to set the number of times
each test is run, from 1 (run test once), to 256.
•
Test Parameters
: to select the tests to include in the batch.
Running the Batch Test
To run the batch test you have configured, select the
Run Batch
command in the
Batch
menu.
The
Batch
menu also contains these commands:
•
Save Batch
: to save the current batch test (with current settings).
•
Load Batch
: to load a previously saved batch test.
NOTE
You cannot change the order in which the tests are performed.
You can abort a batch test while it is running by pressing
.
guard.bk : guard4.fb4 Page 30 Wednesday, June 30, 1999 3:06 PM
- Net Vectra n30 Vectra VE 5xxx series 3 Vectra VE 6xxx series 8 Vectra VA 6xxx Vectra VL 5xxx series 4 Vectra VL 6xxx series 7 Vectra XA 6xxx Vectra VL 5xxx series 5 Vectra XA 5xxx Brio bax Vectra VE Cxxx series 7 Brio 84XX Brio 85xx Vectra VE 5xxx series 4 Brio ba Brio 71xx Net Vectra Vectra VL 6xxx series 6 Vectra VE 5xxx series 2 Vectra XM 5xxx series 4