HP Vectra VL 6xxx series 8 - Manual (Page 61)

English 49
Appendix A The Error Codes
0001h – 00CCh: System Error Codes
0090h PnP function 00 failed. Install new system BIOS.
0091h PnP function 01 failed. Install new system BIOS.
0094h Number of system device nodes is not
the same as reported. Install new system BIOS.
If error persists, install new system board.
0095h One or more nodes have larger than
reported size. Check all PnP devices.
0096h ISA bus detected twice. Install new system BIOS.
0097h No EISA bus system device node Install new system BIOS.
0098h Motherboard has no EISA ID Install new system BIOS.
0099h One or more EISA slots are not
configured. Run the ECU, and then re-run DiagTools. If error
persists, install new system BIOS.
009Ah PnP function 40 failed. Install new system BIOS.
009Bh Invalid number of PnP cards. Check all PnP devices.
009Ch One or more unknown PnP cards. Install new system BIOS.
009Dh No PCI bus system device node. Install new system BIOS.
009Eh Too many PCI buses. Install new system BIOS.
009Fh Insufficient memory. Delete drivers before running DiagTools.
00A0h PnP function 41 failed. Install new system BIOS.
00A1h NVRam buffer size too big. Install new system BIOS.
If error persists, install new system board.
00A2h ESCD size is too small. Install new system BIOS.
If error persists, install new system board.
00A3h ESCD size is too big. Install new system BIOS.
If error persists, install new system board.
Code Explanation Details/Parts to Check
guard.bk : g-e-ref1.fb4 Page 49 Wednesday, June 30, 1999 3:06 PM