HP Vectra VL 6xxx series 8 - Manual (Page 63)

English 51
Appendix A The Error Codes
0100h – 01A4h: Memory Error Codes
0100h – 01A4h: Memory Error Codes
Code Explanation Details/Parts to Check
0100h ROM read error. DiagTools was not able
to read from a ROM location. System board error.
Install new system board.
0101h ROM not write-protected. System board error.
Install new system board.
0102h BIOS cannot set the year to 2000 after
1999 midnight. BIOS error.
Install new system BIOS.
0120h Parity error at absolute memory location
XXXXXXXXh. Memory error.
Replace appropriate memory module.
0130h The pattern written at XXXXXXXXh was
qqqqh. The pattern read back from that
address was pppph. Memory error.
Replace appropriate memory module.
0131h Parity failure at XXXXXXXXh during
pattern test. Memory error.
Replace appropriate memory module.
0132h Faulty memory chip in SIMM XXXX. Install new SIMM XXXX.
0135h ECC correctable error in SIMM/DIMM
socket XXXX/YYYY Memory error.
Replace appropriate memory module.
0136h ECC can not be corrected. Error in
SIMM/DIMM socket XXXX/YYYY. Memory error.
Replace appropriate memory module.
0137h Error occurred on bank XXXX interleave
YYYY Memory error.
Replace appropriate memory module.
0140h Failure at address XXXXXXXXh, bit
position bbh. Memory error.
Replace appropriate memory module.
guard.bk : g-e-ref1.fb4 Page 51 Wednesday, June 30, 1999 3:06 PM