HP Vectra VL 6xxx series 8 - Manual (Page 86)

Appendix A The Error Codes
0E00h – 0E5Fh: SMBus (System Management Bus) Error Codes
74 English
0E00h – 0E5Fh: SMBus (System Management Bus)
Error Codes
0C07h Signature failed. This message is displayed when the signature is not
found. The write test writes a signature on the tape.
First run the write test, and then the read test.
Code Explanation Details/Parts to Check
0E00h Register test failed. Function not supported or system board error.
0E10h Status test failed. Function not supported or system board error.
0E20h <test name> <read/write type>
test failed. Function not supported or system board error.
0E30h LM75 register test failed. Function not supported or system board error.
0E31h LM75 temperature test failed. Function not supported or system board error.
0E32h LM75 test failed. Function not supported or system board error.
0E40h LM80 register test failed. Function not supported or system board error.
0E41h LM80 (voltage|temperature|fan speed)
measurement test error. Function not supported or system board error.
0E42h LM80 test failed. Function not supported or system board error.
0E50h 16LC63 register test failed. Function not supported or system board error.
0E51h 16LC63 (temperature|3.3 Volt|5
Volt|12 Volt|CPU Core Volt|CPU I/O
Volt) measurement failed. Function not supported or system board error.
Code Explanation Details/Parts to Check
guard.bk : g-e-ref1.fb4 Page 74 Wednesday, June 30, 1999 3:06 PM