HP Vectra VL 6xxx series 8 - Manual (Page 67)

English 55
Appendix A The Error Codes
0201h – 02FFh: Hard Disk Error Codes
0210h CRC or ECC data error in sequential test. Diagnostic test error.
Re-run the diagnostic tests.
0211h ECC (Error Correction Coding) corrected
data error. Diagnostic test error.
Re-run the diagnostic tests.
0220h Controller failure. Hard disk controller error.
Check your hard disk drive is installed correctly.
If error persists, install new system board.
0240h Seek operation failed. Hard disk controller error.
Check your hard disk drive is installed correctly.
If error persists, install new system board.
0252h Address mark not found in random test. Re-enter the test parameters and re-run the test.
If error persists, install new hard disk drive.
0254h Requested sector not found in random
test. Re-enter the test parameters and re-run the test.
If error persists, install new hard disk drive.
025Ah Bad sector flag detected in random test. Diagnostic test error.
Re-run the diagnostic tests.
0260h CRC or ECC data error in random test. Diagnostic test error.
Re-run the diagnostic tests.
0265h Drive not ready in random test. Hard disk error.
Check your hard disk drive is installed correctly.
If error persists, install new hard disk drive.
0275h Data mismatch in random test. Hard disk error.
Check your hard disk drive is installed correctly.
If error persists, install new hard disk drive.
0280h Drive not ready in sequential test. Hard disk error.
Check your hard disk drive is installed correctly.
If error persists, install new hard disk drive.
Code Explanation Details/Parts to Check
guard.bk : g-e-ref1.fb4 Page 55 Wednesday, June 30, 1999 3:06 PM