HP Vectra VL 6xxx series 8 - Manual (Page 78)

Appendix A The Error Codes
0601h – 0617h: Serial Port Error Codes
66 English
0609h FIFO trigger level test failed at port
XXXXh. Serial port controller error.
Install new system board.
0610h FIFO character timeout indication test
failed at port XXXXh. Serial port controller error.
Install new system board.
0611h FIFO data transfer test failed at port
XXXXh. Serial port controller error.
Install new system board.
0612h Baud rate speed test failed. If the test is running on a 16650 UART, check the
frequency selected in the test menu matches the
jumper settings on the card.
Re-run the diagnostics test.
0613h Infrared register test failed at port
XXXXh. Serial port controller error.
Install new system board.
0614h Infrared interrupt ID test failed at port
XXXXh. Serial port controller error.
Install new system board.
0615h Infrared internal loopback test failed at
port XXXXh. Serial port controller error.
Install new system board.
0616h Infrared line status test failed at port
XXXXh. Serial port controller error.
Install new system board.
0617h Infrared data transfer test failed at port
XXXXh. Serial port controller error.
Install new system board.
Code Explanation Details/Parts to Check
guard.bk : g-e-ref1.fb4 Page 66 Wednesday, June 30, 1999 3:06 PM