HP Vectra VL 6xxx series 8 - Manual (Page 75)

English 63
Appendix A The Error Codes
0500h – 0590h: SCSI Error Codes
050Ch Error in Partition Table. Read error in disk partition table area.
050Dh Boot sector error. Boot partition is defined incorrectly. Run disk
utilities.
050Eh Media error. Media description of partition is incorrect. Partition
may not be useable.
050Fh Inconsistent sector numbers. Sector number information in Partition Table is
incorrect. Partition is useable, but error will occur
when data accessed exceeds the number of blocks
defined in table.
0510h Cannot allocate memory. Diagnostic test error.
Remove any installed device drivers and restart the
PC or PC Workstation.
Re-run the diagnostic tests.
0511h Positioning failed on tape drive. SCSI tape drive error.
Check the tape drive is connected and configured
correctly.
If error persists, install new SCSI tape drive.
0512h Tape read error. SCSI tape drive error.
Install new SCSI tape drive.
0514h Tape write error. SCSI tape drive error.
Install new SCSI tape drive.
0515h Tape Selftest error. SCSI tape drive error.
Install new SCSI tape drive.
0516h Tape buffer error. Replace tape.
If error persists, install new tape drive.
0520h No CD in drive. SCSI CD-ROM error.
Insert a CD into the CD-ROM drive.
Code Explanation Details/Parts to Check
guard.bk : g-e-ref1.fb4 Page 63 Wednesday, June 30, 1999 3:06 PM